I forgot to add... It idles just fine. It only bogs down, misses and tries to die when I put a load on it - try to drive it. Mike

I have a 1966 stout with clean body and strait frame that I have had since 1976. I'm wondering if anyone out knows the value of A truck of this vintage.

Thought I might throw this out, hopefully someone will have some good advise. Whenever I am stopped at a light or wherever, there is this awful smell, is becoming downright embarrassing. My friends say it is the fuel/air mixture while I am inclined to suspect the catalytic converter. Anyone?

I have a 2002 Taco DoubleCab PreRunner. I would like to get a secure tonneau cover for this. I definately want a hard cover, as I require a secure bed area at times. I'm thinking a roll-top tonneau cover will probably be the way to go, as I can still haul large items without removing the whole thing. I got a price quote on the Pace-Edwards rolltop. They were looking at $825 installed with the tailgate lock. I'm thinking that is a bit too much, anm I wrong? I have not seen too many others...

I have a '95 Tacoma SX with the standard cab, V6, and yes, Bucket seats! russ "MDT Tech®" <ssauer4O@repairman.com> wrote in message news:3EEFE131.20507@repairman.com... | Sean Elkins wrote: | > I was playing around on cars.com designing a standard cab Tacoma and it | > listed bucket seats as an option. I've never seen a standard cab with | > anything but a bench seat. Do bucket seats really exist or is this

I have a 2001 Tundra SR5, V8, with 41k miles. Runs great, but has a vibration that feels like it is in the drivetrain. Have replaced the tires, no change. Tires have been computer balanced several times, including rotation (front to rear & then cross rotation), but no fix. I put the truck on jack stands and put in gear. Tires are clearly not out of round and track straight. But, I did notice that the rear driveline (2 piece unit) appears to have a slight wobble, whereas the front portion of the...

1. Voltage across battery w/o engine running: 12v exactly (it had been several hours since engine had been run). 2. Voltage across battery w engine running, no accessories running @ idle: 13.8v. (voltage remained the same when revving engine to about 2000 rpm) 3. Voltage across battery w engine running, all lights, A/C, blower, hazards (everything on) @ idle: 13.5v. 4. Voltage across battery w engine running, all lights, A/C, blower, hazards (everything on) @ approx. 2000 rpm: 13.8v. 5. ...

In the past 2 years I have bitched a fair amount about several things on my 01 Tundra that I have been displeased with including a Tranny failing on me. With all of that when compared to the competetion I would still buy a Tundra. WF On Mon, 23 Jun 2003 11:36:12 -0500, dbtexas@earthlink.net.invalid wrote:

I can't keep the skezeers offa my hype tip because they like the "rusty" bed!

Hello I'm the new owner of 2003 Tacoma and it is my first 4-wheel drive vehicle I have owned. I have a question regarding shifting in low 4-wheel drive. According to the manual, before shifting into low 4 - the vehicle should be stopped- auto transmission set in neutral - then shift the lever into low 4. When I do this I can feel the gears (not smooth as when shifting from normal

Hi I am looking for a supplier in Canada or the USA for 5 watt or so 12v solar cell panels,12" X 18" or so,that have either a Molex-Waldom connector,battery clamp connectors or cigarette lighter adapter for around $15-25 each. I found 6-7 watt solar cell panels for only $18.88 at: B.G. Micro 555 N. 5th St. Suite #125 Garland (Dallas),Texas 75040 USA

My '98 Tacoma right rear brake light (upper light with the amber lens) does not work when the brake pedal is pressed. However, the right turn signal (same light) does work. I've changed bulbs just for the heck of it and there's no difference. When I depress the brake pedal the right turn signal on the dashboard lights and remains solid green until I release the pedal. I know it's trying to tell me something. Does anyone speak 'Tacoma' who can interpret? The other brake lights work fine, so I...

When I removed my glow plugs for replacement, one snapped off at the element right below the thread and has stayed tightly jammed in the cylinder head. I have no problem starting with one plug U/S but would prefer to remove it if there is an easy way. I have tried running the motor to "blow it out" , didn't work. I tried getting a self tapping screw into it but the white insulating powder in the element wont let the thread get started, and I think it is jammed too hart to pull out that...

I haven't seen this before on my 88 Truck - 22RE engine, but this evening as I started my truck both lights came on. I am sure this is some code and I've searched the net but can't find what it means. My dealership is already closed so I can't call them until tomorrow - hoping to get an answer on the NG. Someone out there must know what this means...Any help is appreciated. Thanks in advance for the replys!! Tim btw, whats with all the spam on this NG?? Geeeezzzzzz........

Discovery Channel - 9 pm. EDT Channel 182 on Dishnetwork. http://dsc.discovery.com/fansites/monstergarage/episode/episode_22.html

What factory Tacoma cd players will fit in a 95.5 Tacoma? I would like to put a stock factory cd player in my truck rather than an aftermarket stereo.

reference my thread > Tacoma Prerunner Unresolved Problem Doe they really care about their coustomers ??????

Hi, I have a '93 Toyota pickup with the 4 cylinder 22RE engine and about 110,000 miles on it. Anyway the engine is idling rough. It is almost a rhythmic idle (speeds up slows down) in a way you could almost set your watch to. It speeds up even worse if I turn on the A/C making it idle faster. I took it into a Toyota dealer and they told me it was the throttle body and it needed to be replaced. Unfortunately throttle body's run $600 new and can't be rebuilt according to several other fuel...

I have three repair manuals, each has it's own merits. However each is a little fuzzy when it gets down to the tranny. I dropped the tranny to do a clutch job. Upon recommendation I am replacing oil seals and a few gaskets along with the clutch kit. I have removed the transfer case, 6-bolts and it slides right off. The next section that has been referred to in my manuals as the "transfer adapter" which is mounted against a thick section that looks like a divider between the transfer adapter...

I have an 01 Tacoma 4x4 extended cab V6 with a noise problem as I let off the gas (coast) at highway speeds. As soon as I put my foot on the gas though it goes quiet. I'm usually pretty good at diagnosing car problems, but have absolutely no idea what could cause this. Anyone have any experience with this?