I have two alumiuim 15" rims that came off of my 87 truck. $25 each.

what cana person pour down the spark plug holes to eat up carbon or to sofen it so when u sart it up can burn it out and how long shuld i let it soke BAIN15

I do this as a hobby, negotiate for those who cannot do it for themselves (no, I am NOT seeking any work from you). Just saved someone almost $3000, got $1250 for two hours' effort... there are articles all over the internet on how to negotiate a car purchase. you are going to pay extra for dealing with a dealer...I bought my 98 4Runner from a private party and got it for $4000 under blue book. "James Y. Yang" <james_y_yang@juno.com> wrote in message

An S-Runner you say!? Do you know how rare your truck is? Congratulations for picking a winner. I've got a supercharged 2001 S-Runner with positraction myself. Do you have anti-lock brakes? Whatever the case, you can run larger rotors if you're willing to move up to 17" wheels. Before spending that kind of money, go to Auto Zone and ask for their Performance Friction brake pads, part# 4334. They are guaranteed for life, and they're under $40. Toyota Racing Division once marketed these same pads...

I just looked up the specs on the 03 4 runner. I always thought the 230 HP 320 lb.-ft. Indicated the Landcruiser engine was put in the 4 runner Then I noticed the 4 runner is an I-Force engine just not the same I-force in the Sequoia and Tundra So what is I-force versus non I-Force

Please excuse my ignorance but I need help. I have a '92 4x4 Extra-cab, 5-speed. Right next to the clutch start cancel button (to the right of it) is what appears to be a factory installed red switch that I have no idea what it does. When I click it up and down I hear a relay switching on and off under the dash. I have tried to follow the wiring but it disappears into a factory wrapped cluster that I can't quite follow. Any ideas would be greatly appreciated. Thanks in advance.

I posted something about this a few months ago but I have a little more info that may clue someone in... My truck had an exhaust leak so I took it in. They replaced the forward most pipe that hooked to the exhaust manifold. That didn't work - they said the exhaust manifold needed replaced. I took it to someone else who took off the manifold and had it machined. They put it back on and it was quiet again. But... That fix caused another problem. The truck idles rough and hesitates when I take...

getting closer to owning a 4runner: '95 4runner v6 auto 4x4: 92800 mi KBB: 7100 (good cond) --> 7800 (exc cond) NADA: 8800 (low retail) --> 11050 (high retail) why the difference? We're looking to buy from a private seller who's asking 9500.

I am having intermitent starting problems. It starts fine for many days and then after being driven it will not start, but i can pop the clutch or wait awile and it will start. I have changed the starter 3 times in the last 8 weeks, so this doesn't seem to be the problem. I have power at the starter and all other electrical systems seem fine.

Hi again... The red brake light renains on even when the handbrake is disengaged...I even took the microswitch out, thnking it was that...and the brake fluid looks ok, the brakes work fine... Anyone know of a TSB or a problem with shorted harnesses? TIA Peter

I don't know much about the technical stuff, but perhaps you could ask your friends/wife/etc. to accompany you on a fun trip to the dealer, and you each buy ONE filter??? "Joel" <joel@cyberbest.com> wrote in message news:Yh90b.2070$yh7.201626691@twister1.starband.net... | Our local Toyota has files on sale for $3.96 but will only allow me to buy | one at that price. We have a Camry and Tacoma. I was wondering if the FRAM | or other filters are just as good. The dealers says the...

According to a report on CNN, the 2003 Tacomas have the worse roll over rating. 2004's are suppose to have an on-board chip to help compensate for possible rollover.

I have a 2001 Tundra and the driver side window rattles when not fully closed or open. My local dealer says this is a common issue with the way the window is held in the door and it is not actually loose. To me, it sounds as if it is loose on the track And it wasn't like that the first year. Any comments?

Hey lucky, did you slap the rotors on straight outta the box? You may want to take them back off and take them to your local machine shop and have them turned on a lathe. That will " true " up any irregularities or runout resulting from being transported from point A to point B It should'nt cost you more than $10 or $20 bucks a rotor depending on what area of the U.S. you're in, notwithstanding Ca. where everything cost a fortune and is taxed to the hilt these days.........where was I ? oh you...

hello. was wondering if anyone has towed a travel trailer with the v8 tundra and how does it do? mileage and performance etc. have a 350 chevy now, thinking about a tundra. thanks, jerry.

awsome parts site: http://www.toyotaguys.com now incorporated into brandsportinc , but nonetheless a awesome place to get OEM parts at almost wholesale prices. just got myself a RS3200 oem alarm kit for $169 site has many other manufacturers as well... happy shopping...

does anyone know where I could purchase Clear Tail Light/Lamps for a 1992 4Runner? My 92 4runner has the Red Park/Stop Light and the Amber Signal Light.. It does NOT have the reverse light with it. Thanks,

Anyone out there have a opinion on Chevron premium 10/30 and Valvoline 10/40 for a 89,000mi straight 6 Thanks

Does anyone out there know a good place to get a Oak colored leather wrapped steering wheel. I have worn through the leather on the steering wheel that is currently mounted on the column. Any help would be appreciated!

When people say you should only pay xxx dollars over invoice I presume they aren't including Tax, Title and License fees in that xxx number, right?? ** remove .invalid from my email address to reply by email **